Lekolulo
0086-17798052865
Re Letsetse
0086-13643212865
E-mail
meifang.liu@hbkeen-tools.com

Factory Customized China Router Bits bakeng sa lehong, plywood le likarolo tse ling tsa patsi

Tlhaloso e Khutšoanyane:

Li-router Bits tse etselitsoeng ho seha likotoana tse otlolohileng ebe li etsa groove, dado kapa sebaka se sekoti bakeng sa ho kenya letsoho.
Haholo-holo e sebelisoa bakeng sa lehong le teteaneng, laminate, boto ea likaroloana le plywood.Pente e holim'a metsi, e thibelang ho bokellana ha lehong, resin le asphalt.


Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Ka tsamaiso ea rona e khabane, bokhoni bo matla ba tekheniki le mokhoa o thata oa taolo ea boleng bo holimo, re tsoela pele ho fa bareki ba rona boleng bo tšepahalang, litheko tse ntle le bafani ba thepa ba ntle haholo.Re ikemiselitse ho ba e mong oa balekane ba hau ba tšepahalang le ho fumana khotsofalo ea hau bakeng sa Factory CustomizedLisebelisoa tsa router tsa Chinabakeng sa mapolanka, plywood le likarolo tse ling tsa lehong, Re tšepa hore re ka ba le tšebelisano e bonolo le borakhoebo ba tsoang lefats'eng lohle.
Ka tsamaiso ea rona e khabane, bokhoni bo matla ba tekheniki le mokhoa o thata oa taolo ea boleng bo holimo, re tsoela pele ho fa bareki ba rona boleng bo tšepahalang, litheko tse ntle le bafani ba thepa ba ntle haholo.Re ikemiselitse ho ba e mong oa balekane ba hau ba tšepahalang le ho fumana khotsofalo ea hau bakeng saLisebelisoa tsa router tsa China, Ke mehlala e tiileng le ho bapatsa ka katleho lefatšeng ka bophara.Ha ho mohla e kileng ea nyamela mesebetsi e meholo ka nako e potlakileng, hoa hlokahala molemong oa hau oa boleng bo holimo bo botle.E tataisoa ke molao-motheo oa Prudence, Efficiency, Union and Innovation.mokhatlo.ke boiteko bo babatsehang ba ho atolosa khoebo ea eona ea machaba, ho phahamisa mokhatlo oa eona.rofit le ho phahamisa sekala sa eona sa thomello.Re ’nile ra kholiseha hore re ’nile ra ba le tebello e khanyang le e tla ajoa lefatšeng lohle lilemong tse tlang.

Lintlha tsa Lihlahisoa
Li-router bits tse nang le lisebelisoa tsa nako e telele tsa ho phela nako e telele, tšekamelo ea ho lula e le bohale, seipone se kang carbide finish, carbide brazing e ntle haholo, khetho e pharaletseng ea boholo le boleng ba bohlokoa ka ho fetisisa ba ho khaola.Li-router bits li khaola lisebelisoa tse fapaneng ho tloha lehong, plywood, MDF le likarolo tse ling tsa lehong, lipolasetiki le bokaholimo bo tiileng.
Li-router bits tse etselitsoeng barati ba mapolanka kapa 'metli, li fana ka phihlelo ea boemo bo latelang le ho fana ka nako e telele ea tšebeliso.
Re kopantsoe le tlhokahalo ea bareki bakeng sa lihlahisoa, ho fana ka lisebelisoa tsa boleng le tse sebetsang hantle tsa ho itšeha.
Tafole e latelang e bonts'a li-router bits ka litlhaloso tse tšoanang, boholo bo bong le setaele li ka fanoa ha u kopa.Haeba u na le lipotso tsa tekheniki ka kopo ikopanye le rona.

Li-router Bits tse Habeli tsa Flute

Ntho NO.

Kantle Diameter (Inch)

Cutting Diameter (Inch)

Bolelele ba ho Seha (Inch)

KEENSR01

1/4”

1/4”

3/4”

KEENSR02

1/4”

3/8”

1-3/16”

KEENSR03

1/4”

5/16”

1-3/16”

KEENSR04

1/4”

1/2”

1-3/16”

Mohlala oa Flush Trim Router Bits

Ntho NO.

Kantle Diameter (Inch)

Cutting Diameter (Inch)

Bolelele ba ho Seha (Inch)

KEENPF01

1/4”

1/2”

25/64”

KEENPF02

1/4”

1/2”

3/4”

KEENPF03

1/4”

1/2”

1”

KEENPF04

1/4”

1/2”

1-1/2”

Hlatsoa ka mokhoa o otlolohileng oa Trim Router Bits

Ntho NO.

Kantle Diameter (Inch)

Cutting Diameter (Inch)

Bolelele ba ho Seha (Inch)

KEENTR01

1/4”

1/4”

3/4”

KEENTR02

1/4”

3/8”

1-3/16”

KEENTR03

1/4”

5/16”

1”

KEENTR04

1/4”

1/2”

1-3/16”

Kopo
Li-router Bits tse etselitsoeng ho seha likotoana tse otlolohileng ebe li etsa groove, dado kapa sebaka se sekoti bakeng sa ho kenya letsoho.
Haholo-holo e sebelisoa bakeng sa lehong le teteaneng, laminate, boto ea likaroloana le plywood.Pente e holim'a metsi, e thibelang ho bokellana ha lehong, resin le asphalt.

Li-router bits tse nang le lisebelisoa tsa nako e telele tsa ho phela nako e telele, tšekamelo ea ho lula e le bohale, seipone se kang carbide finish, carbide brazing e ntle haholo, khetho e pharaletseng ea boholo le boleng ba bohlokoa ka ho fetisisa ba ho khaola.Li-router bits li khaola lisebelisoa tse fapaneng ho tloha lehong, plywood, MDF le likarolo tse ling tsa lehong, lipolasetiki le bokaholimo bo tiileng.
Li-router bits tse etselitsoeng Barati ba mapolanka kapa Mmetli, li fana ka boiphihlelo ba boemo bo latelang le ho fana ka ts'ebeliso e tšoarellang haholo.
Re kopantsoe le tlhokahalo ea bareki bakeng sa lihlahisoa, ho fana ka lisebelisoa tsa boleng le tse sebetsang hantle tsa ho itšeha.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona